PROJ-FILE-FMT=2
PROJ-DRIVER-NAME='Sharp PN-LE801 (Rev C).prjdrv'
PROJ-NAME='Sharp PN-LE801'
PROJ-DRIVER-REV='Rev C'

IR-TIME-0L=750u
IR-TIME-0H=250u
IR-TIME-1L=1.8m
IR-TIME-1H=250u

PROJ-BAUD-RATE=9600,8,N,1

IRCODE['_REPEAT']=""
IRCODE['_PREFIX']=""
IRCODE['_SUFFIX']=""

DOC-INSTALLATION-NOTE[1]="Note: This screen WILL NOT RESPOND to RS232 control unless you send the ENABLE RS232 command while the TV is powered on. The RS232 Enable command is avaialble as a hidden function of this driver."

; power
RSCODE['POWER ON']="'POWR1   ',$0D",REPEATS=1
RSCODE['POWER OFF']="'POWR0   ',$0D",REPEATS=1 
RSCODE['POWER POLL']="'POWR????',$0D",REPEATS=1
POWER-POLL-INTERVAL=10s
POWER-POLL-TIMEOUT=1s
POWER-POLL-THRESHOLD=5
POWER-POLL-STARTBYTE=5
POWER-POLL-MATCH-ANY=False
POWER-POLL-MATCH-BYTES="'1'"
POWER-POLL-TESTBYTE-MASK=255
POWER-POLL-DURING-WARMUP=False
POWER-POLL-DURING-LOCKOUT=True
POWER-POLL-LOCKOUT=10s
RSCODE['ENABLE RS232']="'RSPW1   ',$0D",REPEATS=1,IS-HIDDEN

; volume
RSCODE['VOLUME']="'VOLM',&VASC2,'  ',$0D"
PROJ-USES-ABSOLUTE-VOL=True
VOL-MUTE=0
VOL-RANGE=99
VOL-FLOOR=0

; selection
RSCODE['HDMI 1']="'IAVD1   ',$0D",REPEATS=1,IS-SELECTION
RSCODE['HDMI 2']="'IAVD2   ',$0D",REPEATS=1,IS-SELECTION
RSCODE['HDMI 3']="'IAVD3   ',$0D",REPEATS=1,IS-SELECTION
RSCODE['VIDEO']="'IAVD4   ',$0D",REPEATS=1,IS-SELECTION
RSCODE['COMPONENT']="'IAVD5   ',$0D",REPEATS=1,IS-SELECTION
RSCODE['PC']="'IAVD6   ',$0D",REPEATS=1,IS-SELECTION

; hidden 
RSCODE['MUTE ON']="'MUTE1   ',$0D",REPEATS=1,IS-HIDDEN
RSCODE['MUTE OFF']="'MUTE2   ',$0D",REPEATS=1,IS-HIDDEN
RSCODE['CHANNEL UP']="'CHUP1   ',$0D",REPEATS=1,IS-HIDDEN
RSCODE['CHANNEL DN']="'CHDW1   ',$0D",REPEATS=1,IS-HIDDEN

BYTES-TO-QUEUE=2
IO-DOWNTIME=290m
WARM-UP-DELAY=10s
POWER-ON-DELAY=5s
IO-CANCEL-DOWNTIME-ON-RX=False
USE-MODULATION-WHEN-WIRED=False
INVERT-LINE-WHEN-WIRED=True
CARRIER-PERIOD=26.4u
CARRIER-DUTY-CYCLE=50
PROJ-MISSING-THRESHOLD=5

DEFAULT-CORE-FUNCT[REPEAT]='_REPEAT'
DEFAULT-CORE-FUNCT[PREFIX]='_PREFIX'
DEFAULT-CORE-FUNCT[SUFFIX]='_SUFFIX'
DEFAULT-CORE-FUNCT[POLL]='POWER POLL'
DEFAULT-CORE-FUNCT[ON]='POWER ON'
DEFAULT-CORE-FUNCT[OFF]='POWER OFF'
DEFAULT-CORE-FUNCT[VUP]='VOLUME'
DEFAULT-CORE-FUNCT[VDN]='VOLUME'
DEFAULT-SELECTION[1]='HDMI 1'
DEFAULT-SELECTION[2]='HDMI 2'
DEFAULT-SELECTION[3]='HDMI 3'
DEFAULT-SELECTION[4]='VIDEO'
DEFAULT-HID-FUNCT[OFF]='ENABLE RS232'
DEFAULT-HID-FUNCT[VUP]=''
DEFAULT-HID-FUNCT[VDN]=''
DEFAULT-HID-FUNCT[1]=''
DEFAULT-HID-FUNCT[2]=''
DEFAULT-HID-FUNCT[3]=''
DEFAULT-HID-FUNCT[4]=''
DEFAULT-LOCKOUT=5s

POWER-SENSE-OPTIONS=None,Sensor
IR-WIRING-OPTIONS=IR-Emitter
PASSIVE-MODE=False